Puncture Repair
- £10.00 per wheel
We remove the wheel and inspect the tyre, rim and rim tape to identify the cause. We then fit a new inner tube to ensure the best repair possible. The tyre is then set to the correct pressure, and the old tube put in the rubber recycling box.

Wheel True
- From £12.00 per wheel
We remove the wheel and inspect rim spokes, and hub to identify the cause. The hub may need adjusting to allow it to run freely in the wheel truing jig. The wheel is then trued if economically viable, and any damaged spokes replaced with high quality DT Swiss stainless steel spokes. Spokes are charged separately.

Wheel Build
- From £25.00 per wheel
Your wheels will be hand built and the spokes checked for final tension. Price does not include spokes and nipples. We offer a range of spoke options from DT Swiss, from plain gauge to premium aero bladed spokes.

Adjust Gears
- £6.00
All drivetrain fittings will be tightened. The existing cable will be lubricated and the gears adjusted with correct setting of the stop screws. If the cable inner or outers need replacing, this can be done, and the parts will be charged for. Any missing cable ends will be replaced free of charge.

Adjust Brakes
- £6.00
All brake fittings will be tightened. The existing cable will be lubricated and the brake cable and brake pads adjusted . If the cable inner or outers need replacing, this can be done, and the parts will be charged for. Any missing cable ends will be replaced free of charge

Fit New Chain/Cassette
- £8.00
Your old chain will be removed and disposed of. The freewheel, chainrings and rear derailleur will be given basic clean and then a new chain cut to length and fitted. We STRONGLY recommend the fitting of a new cassette/freewheel when you replace your chain to ensure safe and correct operation.

Full Gear Service
- £15.00
We will remove, inspect and clean all drivetrain components. The cable will be lubricated and if neccasary the inner cables replaced (Charged separately).

Full Brake Service
- £15.00 (Cable Brakes)
We will remove, inspect and clean all brake components. The cable will be lubricated and if neccasary the inner cables replaced (Charged separately). Brake pads will also be inspected for wear.

Hydraulic Brake Bleed
- £15.00 Per Brake
The brake system will be inspected and fittings tightened correctly. The old hydraulic fluid will be removed and safely disposed of. Then the correct replacement fluid will be installed and the brake bled until it is working correctly.

Headset Service
- £15.00
We will remove the handlebar/stem assembly and inspect the headset and steerer assembly. The races will be degreased and the bearings replaced. New grease will be installed, and then the bike re-assembled and the headset correctly adjusted.

Bottom Bracket Service
- £15.00
We will remove the crank and bottom bracket assembly and inspect the frame threads and clean them. The bottom bracket will be inspected, and the races will be degreased and the bearings replaced. New grease will be installed, and then the bike re-assembled and the bottom bracket correctly adjusted.

Fit Tubular Tyre
- £10.00 per wheel
The old tubular will be removed and the seating surface cleaned. Tubular cement will be used to seat a new tubular tyre correctly and allowed to set before inflation to the correct pressure.

Fit Tyre
- £6.00 per wheel
The old tyre will be removed and disposed of into our rubber recycling box. The new tyre will be fitted, and then the wheel re-assembled and gears/brakes checked as required.


Individual Jobs...
CYTECH QUALIFIED

  • Cytech is the bicycle industry's only recognised training and accreditation scheme for cycle mechanics and bike technicians. Cytech Accredited cycle shops will employ staff who have undergone professional training and accreditation to recognised standards...

    Visit Cytech Website